|
CODE |
DESCRIPTION |
|
PROGRAM | |
|
100 |
Lead Edge early at finisher entrance sensor (F1), sheet missed duplex gate (sTray sheet arrival at F1) |
6180 | ||
|
101 |
Lead Edge late at finisher entrance sensor (F1) (Without-Interposer) |
6180 | ||
|
104 |
Trail edge late at finisher entrance sensor (F1). (With Interposer) |
6180 | ||
|
107 |
Lead Edge early at post Inverter sensor (F2), sheet missed Inverter gate |
6180 | ||
|
108 |
Lead Edge late at post Inverter sensor (F2), for a non-inverted sheet (Without Interposer) |
6180 | ||
|
111 |
Lead Edge late at post Inverter sensor (F2) for an inverted sheet (With Interposer) |
6180 | ||
|
112 |
Lead Edge late at output Transport sensor (F3. |
6180 | ||
|
115 |
Trail edge late at output Transport sensor (F3), sheet destined for top Tray |
6180 | ||
|
116 |
Trail edge late at output Transport sensor (F3), sheet destined for bins |
6180 | ||
|
121 |
Lead Edge late at bin A entrance sensor (F4) |
6180 | ||
|
122 |
Trail edge late at bin A entrance sensors (F4) |
6180 | ||
|
123 |
STray sheet arrived at F4, missed bin A gate or previous gate sluggish in returning to home. |
6180 | ||
|
124 |
Lead Edge late at bin B entrance sensor (F4) |
6180 | ||
|
125 |
Trail edge late at bin B entrance sensors (F4) |
6180 | ||
|
126 |
STray sheet arrived at F4, missed bin B gate or previous gate sluggish in returning to home. |
6180 | ||
|
127 |
Lead Edge late at bin C entrance sensor (F4) |
6180 | ||
|
128 |
Trail edge late at bin C entrance sensors (F4) |
6180 | ||
|
129 |
STray sheet arrived at F4, missed bin C gate or gate sluggish in actuating. |
6180 | ||
|
130 |
Lead Edge late at bypass Transport input sensor (F11). |
6180 | ||
|
131 |
STray sheet arrived at bypass Transport input sensor (F11) |
6180 | ||
|
132 |
Lead Edge late from bypass Transport input sensor (F11) to Rotation sensor#1 (RS1). |
6180 | ||
|
133 |
STray sheet arrived at bypass Transport output sensor (F12) |
6180 | ||
|
134 |
Lead Edge late at bypass Transport output sensor (F12) from Rotation sensor#1 (RS1) for a non rotated sheet. |
6180 | ||
|
136 |
Trail edge late at bypass Transport input sensor (F11). |
6180 | ||
|
137 |
Trail edge late at bypass Transport output sensor (F12). |
6180 | ||
|
138 |
Lead Edge late at Bypass Transport Output Sensor(F12) from Rotation sensor#1 (RS1) for a rotated sheet. |
6180 | ||
|
140 |
Lead Edge late at bin exit sensor (F5) (from bin A or C in collated mode or from any bin in Uncollated mode), F5 never covered during shutdown |
6180 | ||
|
141 |
Lead Edge late at bin exit sensor (F5) (from bin A or C in collated mode or from any bin in Uncollated mode), set coasted onto F5 during shutdown |
6180 | ||
|
142 |
Trail edge late at bin exit sensor (F5), F5 still covered after shutdown |
6180 | ||
|
143 |
Lead Edge late at set jam sensor (F6) |
6180 | ||
|
144 |
Trail edge late at set jam sensor (F6) |
6180 | ||
|
148 |
Set fell out of Tilt bed |
|
6180 | |
|
149 |
Set found in tilt bed at initialization |
|
6180 | |
|
151 |
Set did not settle onto stacker in time |
6180 | ||
|
201 |
Bindexer failed to reset to home position in time |
6180 | ||
|
202 |
Bindexer failed to complete an index in time |
6180 | ||
|
211 |
Set Transport failed to reset to home position |
6180 | ||
|
213 |
Stitcher position fault while Stitchers moving in |
6180 | ||
|
214 |
Stitcher position fault while Stitchers moving out |
6180 | ||
|
215 |
Stitch position mechanism failed to reach outboard home position in time |
6180 | ||
|
216 |
Stitch position mechanism failed to reach inboard home position in time |
6180 | ||
|
217 |
Stacker door failed to raise/lower in time |
6180 | ||
|
218 |
Stitcher head A wire feed fault |
|
6180 | |
|
219 |
Stitcher head B wire feed fault |
|
6180 | |
|
222 |
Stacker elevator failed to raise or lower in time |
6180 | ||
|
223 |
Stack delivery drawer failed to extend in time |
6180 | ||
|
224 |
Stack delivery drawer failed to retract in time |
6180 | ||
|
225 |
Stacker offset failed to reach inboard or outboard position in time |
6180 | ||
|
226 |
Stacker offset failed to reach mesh position in time |
6180 | ||
|
230 |
Set Transport late to position sensor from start of motion |
6180 | ||
|
231 |
Set Transport late to home sensor from start of motion (3 pitch) |
6180 | ||
|
232 |
Set Transport late to home sensor from position sensor |
6180 | ||
|
233 |
Set Transport late from start to position sensor |
6180 | ||
|
234 |
Set Transport late to home sensor from start of motion (4 pitch) |
6180 | ||
|
241 |
Stacker door interlock open in print |
|
6180 | |
|
242 |
Right cover open in print |
|
6180 | |
|
243 |
Top cover open in print |
|
6180 | |
|
244 |
Left cover open in print |
|
6180 | |
|
245 |
Bindexer door open in print |
|
6180 | |
|
246 |
Binder drawer open in print |
|
6180 | |
|
247 |
Interlocked 24V missing |
|
6180 | |
|
248 |
Interlock chain failure (24V present with an interlock open) |
6180 | ||
|
251 |
Binder flappers not to operating temperature in time |
6180 | ||
|
253 |
Binder platen not to operating temperature in time |
6180 | ||
|
254 |
Binder flappers went undertemperature after reaching operating temperature |
6180 | ||
|
256 |
Binder platen went undertemperature after reaching operating temperature |
6180 | ||
|
257 |
Binder flappers overtemperature |
|
6180 | |
|
258 |
Binder platen overtemperature |
|
6180 | |
|
261 |
Binder tape failed to feed to sensor in time |
6180 | ||
|
262 |
Binder tape feed mechanism failed to reach home position after cut |
6180 | ||
|
263 |
Spare binder tape found when not expected |
6180 | ||
|
264 |
Binder tape did not adhere to book |
|
6180 | |
|
271 |
Flapper homing fault |
|
6180 | |
|
272 |
Flappers failed to reach pre-registration position in time |
6180 | ||
|
273 |
Flappers failed to reach tape insert position in time |
6180 | ||
|
274 |
Flappers failed to reach flapping position in time |
6180 | ||
|
275 |
Flappers failed to reach home position in time after binding |
6180 | ||
|
276 |
Flapper brake failure |
|
6180 | |
|
281 |
Tilt bed failed to reach pre-registration position or post-registration position in time after binding |
6180 | ||
|
282 |
Tilt bed failed to reach registration or bind position in time me |
6180 | ||
|
283 |
Tilt bed failed to reach post-registration position after registration in time |
6180 | ||
|
285 |
Tilt bed failed to reach pre-registration position at initialization |
6180 | ||
|
286 |
Tilt bed brake failure |
|
6180 | |
|
287 |
Tilt bed failed to reach load or unload position in time during run |
6180 | ||
|
290 |
Bypass Transport main drive encoder signal error detected by the SMIOC board. |
6180 | ||
|
291 |
SMIOC board detected bypass Transport stepper motor rate outside expected limit. |
6180 | ||
|
292 |
24VDC missing from bypass Transport |
6180 | ||
|
400 |
Sheet handling jam in External Bypass Transport Finishing Device. |
6180 | ||
|
401 |
Set jam in External Bypass Transport Finishing Device. |
6180 | ||
