...to avoid scrolling this long list, press the 'blackberry' button, select 'Find', input the last 3 digits...
|
021-360 |
EP Accessory Fail |
An error occurred in connection with EP-Accessory. The accessory should have been installed. |
|
021-361 |
EP Accessory Kind Configuration Error |
Regarding connection to an old subtract type of EP accessory, DC131 [850-007] is set to "0" (no accessory). |
|
021-732 |
EP Accessory Service Canceled By Disable |
With Accessory installed, the following occurs: the card not installed, money short, or residual amount of prepaid money short. |
|
021-750 |
Used Parts Collection Request Fail |
When collection of U parts was ordered, EP-SV reported an error. |
|
021-751 |
Maintenance Request Fail |
When a check/repair/preliminary diag was requested, EP-SV reported an error. |
|
021-941 |
EP Accessory Scan Service Paused By Disable |
With Accessory installed, any of the following occurs: the card not installed, money short, and residual amount of prepaid money short. |
|
021-943 |
EP Accessory Print Service Paused By Disable |
With Accessory installed, any of the following occurs: the card not installed, money short, and residual amount of prepaid money short. |
|
021-945 |
EP Accessory Service Paused By Disable |
With Accessory installed, any of the following occurs: the card not installed, money short, and residual amount of prepaid money short. |
|
024-340 |
IOT-ESS Communication Fail 1 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-341 |
IOT-ESS Communication Fail 2 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-342 |
IOT-ESS Communication Fail 3 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-343 |
IOT-ESS Communication Fail 4 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-345 |
IOT-ESS Communication Fail 5 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-346 |
IOT-ESS Communication Fail 6 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-347 |
IOT-ESS Communication Fail 7 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-348 |
IOT-ESS Communication Fail 8 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-349 |
IOT-ESS Communication Fail 9 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-350 |
IOT-ESS Communication Fail 10 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-351 |
IOT-ESS Communication Fail 11 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-354 |
IOT-ESS Communication Fail 14 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-356 |
IOT-ESS Communication Fail 16 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-362 |
Page Sync Illegal Start |
In IOT output, PageSync became active before output data was written until FIFO was |
|
024-363 |
Page Sync Illegal Stop |
In IOT output, PageSync became invalid before data of a specified size was output. |
|
024-364 |
DMA Transfer Fail |
In compression/expansion, compression/expansion of specified input data does not finish. |
|
024-367 |
Decompress Other Fail |
During IOT output, incorrect LINE SYNC was detected. |
|
024-368 |
PCI Error |
A problem with PCI Bus caused a PCI access error. |
|
024-370 |
Marker Code Detect Fail |
When data was expanded by a specified size, it was found that the compressed data had no End code. |
|
024-371 |
IOT-ESS Communication Fail 21 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-372 |
IOT-ESS Communication Fail 22 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-373 |
IOT-ESS Communication Fail 23 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-375 |
IOT-ESS Communication Fail 24 |
ESS PWB detected an IOT-ESS communication failure. |
|
024-600 |
- |
Billing Master Counter Repair |
|
024-601 |
- |
Billing Backup Counter 1 Repair |
|
024-602 |
- |
Billing Backup Counter 2 Repair |
|
024-603 |
- |
SWKey Master Counter Repair |
|
024-604 |
- |
SWKey Backup Counter 1 Repair |
|
024-605 |
- |
SWKey Backup Counter 2 Repair |
|
024-747 |
Print Instruction Fail |
An incorrect print-parameter selection: a non-standard size is selected with "Paper Tray Selection" set to "Auto." |
|
024-910 |
Tray 1 Size Mismatch |
The length in slow scan of paper being transported is different from that of paper the tray senses. (Regi Sensor senses length in slow scan.) |
|
024-911 |
Tray 2 Size Mismatch |
The length in slow scan of paper being transported is different from that of paper the tray senses. (Regi Sensor senses length in slow scan.) |
|
024-912 |
Tray 3 Size Mismatch |
The length in slow scan of paper being transported is different from that of paper the tray senses. (Regi Sensor senses length in slow scan.) |
|
024-913 |
Tray 4 Size Mismatch |
The length in slow scan of paper being transported is different from that of paper the tray senses. (Regi Sensor senses length in slow scan.) |
|
024-914 |
Tray 6 Size Mismatch |
The length in slow scan of paper being transported is different from that of paper the tray senses. (Regi Sensor senses length in slow scan.) |
|
024-915 |
Tray 7 Size Mismatch |
The length in slow scan of paper being transported is different from that of paper the tray senses. (Regi Sensor senses length in slow scan.) |
|
024-916 |
Mix Full Stack |
In Mix Full Position Detection, one of the following occurred: |
|
024-917 |
Stacker Tray Staple Set Over Count |
During ejection of sets of stapled sheets, the count of sets of stapled sheets ejected in Stacker Tray exceeded 50. |
|
024-940 |
Folder Tray Out of Place |
Folder Tray is not installed. |
|
024-941 |
Folder Tray Full Stack |
Folder Tray is full of a stack. |
|
024-942 |
Booklet Sheets Over Count |
Booklet paper qty is over. |
|
024-943 |
Booklet Low Staple |
Staples for booklets are low. (Cartridge Missing is also handled as this fault code.) |
|
024-945 |
Booklet Full Stack |
The qty of sets ejected into Booklet Tray reached the system data threshold. |
|
024-946 |
Tray 1 Not In Position |
Tray 1 is not inserted. |
|
024-947 |
Tray 2 Not In Position |
Tray 2 is not inserted. |
|
024-948 |
Tray 3 Not In Position |
Tray 3 is not inserted. |
|
024-949 |
Tray 4 Not In Position |
Tray 4 is not inserted. |
|
024-950 |
Tray 1 No Paper |
Tray 1 has no paper. |
|
024-951 |
Tray 2 No Paper |
Tray 2 has no paper. |
|
024-952 |
Tray 3 No Paper |
Tray 3 has no paper. |
|
024-953 |
Tray 4 No Paper |
Tray 4 has no paper. |
|
024-954 |
MSI No Paper |
Tray 5 has no paper. |
|
024-955 |
Tray 6 No Paper |
Tray 6 has no paper. |
|
024-956 |
Tray 7 No Paper |
Tray 7 has no paper. |
|
024-957 |
Interposer No Paper |
Interposer has no paper. |
|
024-958 |
MSI Size Mismatch |
The size of paper in MSI is different from that selected for print. |
|
024-959 |
Tray 1 Paper Size Mismatch |
The size of paper in Tray 1 is different from that selected for print. |
|
024-960 |
Tray 2 Paper Size Mismatch |
The size of paper in Tray 2 is different from that selected for print. |
|
024-961 |
Tray 3 Paper Size Mismatch |
The size of paper in Tray 3 is different from that selected for print. |
|
024-962 |
Tray 4 Paper Size Mismatch |
The size of paper in Tray 4 is different from that selected for print. |
|
024-964 |
Stapler Sheets Counts Over |
Over the max qty of paper for stapling: 50 |
|
024-965 |
ATS/APS No Paper |
Unavailable is the paper selected for print. |
|
024-966 |
ATS/APS No Destination Error |
The paper selected for print cannot be found. |
|
024-967 |
Different Width Mix Paper Detect (Staple Job) |
With Stapling Paper with the Same Width Only enabled, Mixed-in-width paper was |
|
024-968 |
Stapler/Punch Batting |
Stapling and punching coincide. |
|
024-969 |
Different Width Mix Punch |
During printing in Punch Mode, paper with a different width was detected. |
|
024-970 |
Tray 6 Not In Position |
Tray 6 is not inserted. |
|
024-971 |
Tray 7 Not In Position |
Tray 7 is not inserted. |
|
024-972 |
Tray 6 Paper Size Mismatch |
The size of paper in Tray 6 is different from that selected for print. |
|
024-973 |
Tray 7 Paper Size Mismatch |
The size of paper in Tray 7 is different from that selected for print. |
|
024-974 |
Interposer Tray Size Mismatch |
During paper feed from Interposer, the size selected is different from the tray paper size. |
|
024-975 |
Booklet Sheets Over Count (Not Field Attachment) |
The qty of paper for Booklet is over (no field attachment). |
|
024-976 |
Finisher Staple Status NG |
Staple Home Sensor OFF changing to ON could not be detected 450ms after Staple Mot started rotating forward, and Stapler Head Home Sensor was turned ON 200ms after it rotated backward. |
|
024-977 |
Stapler Feed Ready Fail |
1. At the start of stapling, Staple Ready Sensor is OFF. |
|
024-978 |
Booklet Stapler NG |
Ready Signal stays Not Ready a spec time after the start of Booklet stapling. |
|
024-979 |
Stapler Near Empty |
Staple Cartridge Near Empty, or Poor Staples Feed (handled as Empty). |
|
024-980 |
Finisher Stacker Tray Full |
One of the following: |
|
024-981 |
Finisher Top Tray Full |
Top Tray Sensor stays ON for 10 consecutive secs. |
|
024-982 |
Stacker Lower Safety Warning |
Stacker Tray Lower Safety SW turned ON. |
|
024-983 |
Booklet Tray Full |
Booklet Tray is full. |
|
024-984 |
Booklet Low Staple F |
1. Right before the stapling operation, Booklet Stapler Low Staple F Signal turned ON. |
|
024-985 |
Booklet Low Staple R |
1. Right before the stapling operation, Booklet Stapler Low Staple R Signal turned ON. |
|
024-986 |
Confirmation of Printing All |
Check whether to print or not a remaining qty of paper in Proof Print. |
|
024-987 |
Envelope Folder Tray Full |
Envelope Folder Tray is full. |
|
024-988 |
Envelope Folder Tray Set Fail |
Envelope Folder Tray is improperly installed. |
|
024-989 |
Booklet Low Staple R |
1. Right before the stapling operation, Booklet Stapler Low Staple R Signal turned ON. |
|
024-990 |
Punch Dust Full |
Punch Dust Box is full. |
|
025-596 |
Diag HDD Fail 1 |
NG occurred when DC355 HDD Failure Prediction was carried out. |
|
025-597 |
Diag HDD Fail 2 |
An error occurred when DC355 HDD Initialize was carried out. |
|
027-452 |
Duplicate IP address |
Multiple IP addresses are the same. |
|
027-500 |
SMTP Server Address Resolution Fail |
For transmission of reply mail, SMTP Server Name is not correct. |
|
027-501 |
POP Server Address Resolution Fail |
For use of POP3 Server, POP3 Server Name is not correct. |
|
027-502 |
POP Authentication Fail |
At its attempt to use POP3 Protocol, the MC failed to log in to POP3 Server. |
|
027-700 |
Media Fail |
A Media failure. |
|
027-701 |
Media Not Found |
No medium is installed. |
|
027-702 |
Media Data Not Found / Not Supported |
Data in the medium is damaged, or it has no data. |
|
027-703 |
Media Reader Fail / Disconnected |
ESS cannot access Media Reader. |
|
027-720 |
Ext Srv. Host Not Found |
The server directed to link to the application was not found, or DNS could not be confirmed. |
|
027-721 |
Ext Srv. Not Found |
Despite its attempt to link to the application, the MC received from the target host a reply saying the application to link could not be found. |
|
027-722 |
Ext Srv. Timeout Fail |
An attempt to link to the application failed because time was out. |
|
027-723 |
Ext Srv. Authentication Fail |
An attempt to link to the application resulted in a failure in authentication. |
|
027-724 |
Ext Srv. Access Fail |
An attempt to link to the application failed (for any reason other than Service Not Found, Timeout and Authentication Failure). |
|
027-725 |
Ext Srv. Operation Fail |
A job operation failed at where the application was linked. |
|
027-726 |
|
The state of a job became unknown at where the application was linked. |
|
027-727 |
Ext Srv. Req Invalid Params |
Parameters for linking to the application are invalid. |
|
027-737 |
Template Server Read ERR |
An error occurred during reading of data from Job Template Pool Server. |
|
027-739 |
Invalid Template Server Path |
The Job Template Pool Server specified was not found. |
|
027-740 |
Template Server Login ERR |
The MC failed to login to Job Template Pool Server. |
|
027-741 |
Template Server Connect Fail |
Connection to Job Template Pool Server failed. |
|
027-742 |
HD File System Full |
Due to a lack of HDD area, the job template could not be stored. |
|
027-743 |
Template Server Install ERR |
Job Template Pool Server settings are incorrect. |
|
027-744 |
Template Server ADD ERR |
The Job Template Pool Server domain name has a problem. |
|
027-745 |
Template Server ADD ERR |
The DNS Server address is not set up on the MC. |
|
027-746 |
Job Template Pool Server Not Ready |
The protocol port specified by the Job Template Pool Server setting is not actuated. |
|
027-750 |
Fax Document Incongruent |
With iFAX doc e-mailing/iFAX transmission prohibited, either of them was carried out. |
|
027-751 |
Job Template Analysis Error |
An error was detected during analysis of instructions. |
|
027-752 |
Must User un Inputting |
Though the user did not enter all the requirements, the MC was instructed to start a job. |
|
027-753 |
Job Flow Service Request Disabled |
The job flow service is unavailable. |
|
027-760 |
XJT Command Fail |
An illegal command from XDOD client |
|
027-796 |
Email Not Printed |
The mail was discarded because a mail without any doc attachment was received despite the setting that enables print of only attached doc. |
|
027-797 |
Invalid Output Destination |
The MC that output a mail is invalid. |
